Hi everybody. It’s my first time here so please excuse me if I’m posting in the wrong place.
Anyway I have a few dresses that are held up with straps that tie together behind my neck.
What I would like is a knot which I could use to adjust the tightness of the strap
without untying, while also not being too bulky.
The fisherman’s knot kinda works, but it can be difficult to untie without damaging the strap.
I just had an idea. Tie the fisherman’s bend but instead of overhand knots tie figure of eight knots around the respective ends. The resulting knot is slightly bulkier but slides easily and is relatively easy to untie, at least in my first, rough 'n ready test I just did on some 3mm PP line. I don’t know if it holds up to your demands and expectations but at least its worth a try. If you do, let us know whether it works for you or why it doesn’t.
I wonder whether a bend is the right approach? A grip hitch, say Blake’s hitch may be easier to undo, this leaves one end longer which may be unacceptable of course.
This may be cheating, but perhaps it’d be good not to involve the straps in a knot themselves, but rather use a separate small cord to squeeze the two straps as they lie side by side. You could adjust the tightness of the separate binder to allow adjustment while maintaining adequate security.
I’ll leave it up to you to decide if you want the straps to enter from the same side of the Constrictor Knot or from opposite sides. If you need to loosen the Constrictor, you’d flex the straps to place the Constrictor crossings inside the elbow of the flexure.
Hi Jenny and welcome to the forum.
About any knot can be slipped to ease the untying. So if you can live with the bulkiness of the fisherman’s knot (most knots will be bulky anyway) just make it slipped. For that matter two slipped overhands would do.
I do like Roo’s suggestion of a “decorative” knot to supply the friction bite around the straps. Now the challenge is to select one that is easy enough and looks good.
Although a solution has been found, I’m kind of surprised no one mentioned the Double Coin knot… I’ve used it several times for just such a purpose and it acts effectively like a bend.