# Skeleton

**URL:** <https://discourse.igkt.net/t/skeleton/6654>\
**Category:** Knot-related Computing\
**Created:** [10 November 2018 16:20 UTC](https://discourse.igkt.net/t/skeleton/6654 "2018-11-10T16:20:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![DerekSmith](https://discourse.igkt.net/letter_avatar_proxy/v4/letter/d/85e7bf/32.png) [@DerekSmith](https://discourse.igkt.net/u/DerekSmith)\
**Post date:** [10 November 2018 16:20 UTC](https://discourse.igkt.net/t/skeleton/6654/1 "2018-11-10T16:20:06Z")

</div>

Anyone have any idea what software would have been used to produce this image?

Found it on Facebook with no attribute.

---

<div class="post-metadata">

**Author:** ![SS369](https://discourse.igkt.net/user_avatar/discourse.igkt.net/ss369/32/18_2.png) [@SS369](https://discourse.igkt.net/u/SS369)\
**Post date:** [10 November 2018 22:40 UTC](https://discourse.igkt.net/t/skeleton/6654/2 "2018-11-10T22:40:55Z")

</div>

Wire frame graphics.  
Many graphics software offer this.

---

<div class="post-metadata">

**Author:** ![KnotMe](https://discourse.igkt.net/user_avatar/discourse.igkt.net/knotme/32/5735_2.png) [@KnotMe](https://discourse.igkt.net/u/KnotMe)\
**Post date:** [11 November 2018 07:16 UTC](https://discourse.igkt.net/t/skeleton/6654/3 "2018-11-11T07:16:59Z")

</div>

Tie your knots with [this stuff](https://www.beadfx.com/catalogue/nylon-mesh-tube-c-62_450/) (nylon mesh tubes), and you don’t need a computer. 😃

---

<div class="post-metadata">

**Author:** ![DerekSmith](https://discourse.igkt.net/letter_avatar_proxy/v4/letter/d/85e7bf/32.png) [@DerekSmith](https://discourse.igkt.net/u/DerekSmith)\
**Post date:** [11 November 2018 08:15 UTC](https://discourse.igkt.net/t/skeleton/6654/4 "2018-11-11T08:15:32Z")

</div>

Thanks Carol, that is what I call clever thinking.

Turns out that it is available over here in the UK as ‘Hollow Craft Nylon Mesh Tubing’, 30p per m.

I should have some here by next week to play with - I think the challenge though is going to be stopping my grandkids from making bracelets with it… Perhaps I shouldn’t have also ordered those magnetic endcaps.

Derek

---

<div class="post-metadata">

**Author:** ![struktor](https://discourse.igkt.net/letter_avatar_proxy/v4/letter/s/3da27b/32.png) [@struktor](https://discourse.igkt.net/u/struktor)\
**Post date:** [11 November 2018 10:41 UTC](https://discourse.igkt.net/t/skeleton/6654/5 "2018-11-11T10:41:45Z")

</div>

Parameterization and Welding of a Knotbox.  
Prof. Dr.-Ing. Daniel Loridick.  
[http://daniellordick.de/docs/Lordick-DMS-2011.pdf](http://daniellordick.de/docs/Lordick-DMS-2011.pdf)

[https://upload.wikimedia.org/wikipedia/commons/thumb/8/8b/Technische\_Sammlungen\_Dresden\_-\_Erlebnisland\_Mathematik\_-\_Durchkrabbelknoten\_-\_DSC4404.jpg/640px-Technische\_Sammlungen\_Dresden\_-\_Erlebnisland\_Mathematik\_-\_Durchkrabbelknoten\_-\_DSC4404.jpg](https://upload.wikimedia.org/wikipedia/commons/thumb/8/8b/Technische_Sammlungen_Dresden_-_Erlebnisland_Mathematik_-_Durchkrabbelknoten_-_DSC4404.jpg/640px-Technische_Sammlungen_Dresden_-_Erlebnisland_Mathematik_-_Durchkrabbelknoten_-_DSC4404.jpg)

[https://youtu.be/mV6TS0axmpQ](https://youtu.be/mV6TS0axmpQ)